For joining pipelines, use HILCO Pipeweld 6010 or Pipeweld 7010. These are cellulosic covered electrodes with a deeply penetrating, forceful arc, specifically designed for vertical down welding of pipe joints in the field.
Why pipelines require a dedicated electrode
Pipelines for oil, gas and water are almost always welded outdoors. The welder works in the open air, often under a small tent to keep out the wind. There is no workshop, no gas cylinder and little room to manoeuvre. In addition, the first pass must achieve full penetration, so that the joint is sealed across the entire wall thickness.
That calls for an electrode with a high degree of penetration and an arc that is easy to control in the vertical down direction. A standard rutile electrode does not meet those requirements. The Pipeweld range has been developed precisely for this work.
The difference between the two versions
Product AWS Intended for Pipeweld 6010 A5.1 E 6010 All positions, in particular vertical down and overhead Pipeweld 7010 A5.5 E 7010-P1 Butt welds in high-strength steel pipe, vertical down In short: 6010 is the broad choice for pipework in unalloyed steel, 7010 is intended for pipe with a higher strength class. In both cases the slag is easy to remove, which saves time when working in the field.
Packaging is not a detail here
Cellulosic covered electrodes need a certain moisture content to work properly. That is why Pipeweld electrodes are supplied in metal tins instead of cardboard boxes. This packaging maintains the moisture level required for correct performance. Keep the tins closed and in a dry place.
Applications in practice
- Laying and extending transport pipelines for oil, gas and water
- Connecting pipelines between platform, storage and processing
- Repairing existing pipeline sections in the field
- Smaller and local pipeline projects that require a fast turnaround
In the oil and gas chain, welding takes place at every stage: during extraction, in distribution, in storage and in refining. The structural side of this sector also requires products from the unalloyed steel and low-alloy steel ranges. Read more about these applications on our oil and gas page.
Where pressure and temperature are not the issue
In oil pipelines, pressure and temperature play a limited role, because the product is transported at ambient temperature. The requirements here relate to weldability in the field and to the penetration of the joint. That is a different matter from boilers and steam pipes, where heat-resistant properties are indeed required. For those applications, look at the creep-resistant products in the low-alloy steel range.
The data sheets and safety data sheets for the Pipeweld range can be found under unalloyed steel documentation.
We are happy to think along with you about the right electrode for your pipework.














