What are creep-resistant welding consumables and when do I need them?

Creep-resistant or heat-resistant welding consumables retain their strength at elevated temperature. You need them as soon as a structure has to withstand high temperature and high pressure simultaneously over a long period, as in boilers, pressure vessels, steam pipes and installations in the process industry.

What happens at high temperature

Ordinary structural steel loses strength as the temperature rises. For a steam pipe at 550 degrees Celsius that is permanently under pressure, that is unacceptable. The material then slowly deforms under a load that it would carry without any problem at room temperature. This phenomenon is called creep.

Adding chromium and molybdenum creates a fine-grained structure that retains its strength even at elevated temperature. The higher the service temperature, the more alloying elements are required. In English-language documentation, you will find these products under the term creep resisting.

The range sorted by temperature

ProductAWSBase materialService temperature up to
B12MoA5.5 E 7018-A116Mo3 and equivalentapprox. 500 degrees Celsius
B19CrMoA5.5 E 8018-B2 H413CrMo4-5 and equivalentapprox. 550 degrees Celsius
BCrMo2A5.5 E 9018-B3 H410CrMo9-10 and equivalentapprox. 600 degrees Celsius

You will find the same structure in the TIG rods: Fer SGMo to AWS ER 70S-A1 for 16Mo3 up to approx. 500 degrees Celsius, Fer SGCrMo1 to ER 80S-B2 for 13CrMo4-5 and Fer SGCrMo2 to ER 90S-B3 for 10CrMo9-10. This allows you to switch welding process within the same strength class.

Preheating and post-weld treatment

Low-alloy creep-resistant steels are readily weldable in themselves, but require care before, during and after welding. There are requirements for preheating, interpass temperature and post-weld heat treatment. The exact values depend on the base material and the wall thickness.

The electrodes in this range are low hydrogen, with a content below 5 millilitres per 100 grams of weld metal. Part of the range is vacuum packed, so that the electrodes remain dry until the moment of use.

Where you will come across these products

  • Boilers, pressure vessels and superheaters in steam-generating installations
  • Steam pipes that keep processes at temperature
  • Distillation columns and heat exchangers in refining
  • Piping and valves in the process industry

In many sectors, steam is the heat source used to start and maintain processes. That applies to refineries, but equally to the food industry. As a result, the applications in power generation, oil and gas and the chemical industry overlap considerably.

A more detailed discussion can be found in our article on creep-resistant welding consumables for high temperature and pressure. The associated data sheets can be found under low-alloy steel documentation.

Let us know the base material and the service temperature, and we will advise you on the appropriate product and the associated heat treatment.

Contact

Do you have a question? Feel free to contact us using this contact form!

  1. What are creep-resistant welding consumables and when do I need them?
    "

    Creep-resistant or heat-resistant welding consumables retain their strength at elevated temperature. You need them as soon as a structure has to withstand high temperature and high pressure simultaneously over a long period, as in boilers, pressure vessels, steam pipes and installations in the process industry.

    What happens at high temperature

    Ordinary structural steel loses strength as the temperature rises. For a steam pipe at 550 degrees Celsius that is permanently under pressure, that is unacceptable. The material then slowly deforms under a load that it would carry without any problem at room temperature. This phenomenon is called creep.

    Adding chromium and molybdenum creates a fine-grained structure that retains its strength even at elevated temperature. The higher the service temperature, the more alloying elements are required. In English-language documentation, you will find these products under the term creep resisting.

    The range sorted by temperature

    ProductAWSBase materialService temperature up to
    B12MoA5.5 E 7018-A116Mo3 and equivalentapprox. 500 degrees Celsius
    B19CrMoA5.5 E 8018-B2 H413CrMo4-5 and equivalentapprox. 550 degrees Celsius
    BCrMo2A5.5 E 9018-B3 H410CrMo9-10 and equivalentapprox. 600 degrees Celsius

    You will find the same structure in the TIG rods: Fer SGMo to AWS ER 70S-A1 for 16Mo3 up to approx. 500 degrees Celsius, Fer SGCrMo1 to ER 80S-B2 for 13CrMo4-5 and Fer SGCrMo2 to ER 90S-B3 for 10CrMo9-10. This allows you to switch welding process within the same strength class.

    Preheating and post-weld treatment

    Low-alloy creep-resistant steels are readily weldable in themselves, but require care before, during and after welding. There are requirements for preheating, interpass temperature and post-weld heat treatment. The exact values depend on the base material and the wall thickness.

    The electrodes in this range are low hydrogen, with a content below 5 millilitres per 100 grams of weld metal. Part of the range is vacuum packed, so that the electrodes remain dry until the moment of use.

    Where you will come across these products

    • Boilers, pressure vessels and superheaters in steam-generating installations
    • Steam pipes that keep processes at temperature
    • Distillation columns and heat exchangers in refining
    • Piping and valves in the process industry

    In many sectors, steam is the heat source used to start and maintain processes. That applies to refineries, but equally to the food industry. As a result, the applications in power generation, oil and gas and the chemical industry overlap considerably.

    A more detailed discussion can be found in our article on creep-resistant welding consumables for high temperature and pressure. The associated data sheets can be found under low-alloy steel documentation.

    Let us know the base material and the service temperature, and we will advise you on the appropriate product and the associated heat treatment.

    "
  2. Which welding consumable should I choose for high-strength steel?
    "

    For low-alloy high-strength steel with a yield strength of around 690 MPa, use HILCO K80, a solid wire to AWS A5.28 ER 110 S-G. This type of steel is used where structures must remain light yet carry heavy loads.

    Why build light to be strong

    With lifting and hoisting equipment, the dead weight works against you. A crane that already weighs twenty tonnes by itself can lift less because its own mass gets in the way. The same applies to scaffolding and frames: if you make them heavy in relatively weak steel grades, the structure becomes unwieldy and more expensive.

    The solution is to build thinner with stronger material. Low-alloy high-strength steels derive their strength from a low alloy content in combination with a specific production process. They are readily weldable, provided you take the right precautions.

    What to monitor during welding

    The strength and toughness of high-strength steel derive from its microstructure. That structure must remain intact after welding. Excessive heat input or an incorrect interpass temperature affects that structure, causing you to lose precisely the property for which you chose this steel.

    • Keep the heat input within the specified limits
    • Monitor the interpass temperature between the passes
    • Use low-hydrogen filler metals to prevent cold cracking
    • Make sure the weld joint is clean and dry

    The range for this application

    ProductAWSFormApplication
    K80A5.28 ER 110 S-GSolid wire, MAGHigh-strength steel with yield strength approx. 690 MPa
    Fer SGNi1A5.28 ER 80S-Ni 1TIG rodFine-grained steel with impact toughness requirements
    BasicA5.1 E 7018-1Covered electrodeStructural work on thicker plates
    Basic SuperA5.1 E 7018-1Covered electrodeStructural work on AC and DC

    For structural work on thicker plates with requirements for toughness and strength, the basic electrodes Basic and Basic Super remain the starting point. K80 comes into play as soon as the base material actually falls into the high-strength class.

    Where you will come across this

    High-strength steel is used in pressure vessels, mobile cranes, lifting equipment and vehicle frames. It also plays a role on the structural side of the petrochemical industry: a refinery consists not only of pipes and boilers, but also of large amounts of steel structure. Read more about this on our heavy fabrication page.

    What matters in inspection

    Structures made of high-strength steel are often subject to an inspection regime. A pressure vessel that fails or a crane that collapses can have major consequences. The designer therefore draws up a welding procedure that specifies which base materials and which welding consumables may be used. Both must be certified and the welder must be qualified for the work concerned.

    Always check which steel grade is stated on the drawing. Designations differ per standard, with old DIN designations and new EN designations in circulation side by side.

    Send us the steel grade and the plate thickness, and we will advise you on the appropriate filler metal.

    "
Certificates
  • TUV.png
  • LR.png
  • ISO.png
  • DNV.png
  • CE.png
  • Bureau Veritas.png
  • AEO.png
  • ABS.png
Read more >
Receive our newsletter!

Sign up for the free newsletter to stay up to date

Quote list Shopping cart

Your quote list is still empty!

Add products from the catalog to place an order
Continue shopping
  • :
  • :
  • Totaal gewicht
Op voorraad
Not in stock
Aanbevolen producten