For welding and surfacing copper, copper alloys and bronze, use HILCO Bronsil, a basic covered tin bronze electrode to AWS A5.6 E CuSn-C. Typical applications are the repair of ship propellers, rotors and bearings.
Why bronze in the maritime sector
Bronze is widely used in places where components are permanently in contact with water. Ship propellers, bearing bushes and fittings are examples of this. The material withstands the conditions that prevail there, but it does get damaged in collisions, through contact with floating debris and through wear in service.
Replacing such components is costly and requires lead time. In many cases, repair is the faster and more economical route, especially when a ship is in port and has to sail again within a limited time window.
What Bronsil can do
Property Explanation AWS A5.6 E CuSn-C mod. Basic covered tin bronze electrode Joining and surfacing Suitable for copper, copper alloys and bronze alloys Surfacing on steel Can be used for cladding steel Smaller repairs Also usable on cast iron and C/Mn steel Diameters 2.5 to 4.0 millimetres In addition to maritime applications, the product is used in heavy mechanical engineering. Read more about that sector on our heavy fabrication and shipbuilding pages.
Repairs on board
On a ship, there is more to do than repairing plate work. In the engine room there are pumps and engine parts that fail. On deck there are winches, hooks and eyes that can break off during mooring. These situations require a compact repair kit that can handle a variety of materials.
- For steel, use Basic or Basic Super
- For cast iron pump housings, use Nickel Iron or Pure Nickel
- For bronze and copper alloys, use Bronsil
- For aluminium components, use the Aluminil electrodes
- For unknown or difficult to weld steel, use Hilchrome 312R
Why fast action pays off here
Ships are held up on their voyage by damage and breakdowns. Collisions, manoeuvring damage and mechanical problems in the engine room occur on all types of ships, from tankers and bulk carriers to smaller vessels. When a ship is laid up for repair, every day counts. That requires the right products to be available at the moment they are needed, and someone on board or in the workshop who knows which product belongs with which material.
With these five products, you cover a large proportion of the repairs that occur on board or in a workshop. The data sheets can be found under non-ferrous documentation.
We are happy to help you put together a repair kit for your situation.














