Hardfacing is the application of a wear-resistant weld layer to a component so that it lasts longer. You apply it to components that become thinner due to abrasion, impact or friction, and you apply it to worn components or preventively to new components.
How it works in practice
Compare it to a knife that becomes blunt and thinner through frequent use. You apply a number of weld layers, grind them back to size and the component is usable again. The same happens with a roller that crushes sugar cane. At a certain point, the roller has worn down so far that it no longer meets the tolerances and the product is no longer fully crushed. The roller is dismantled, a few centimetres of material are built up by welding, and it is machined flat again on the lathe. It then goes back into production.
This is not a one-off repair but an ongoing process. In many companies it is simply part of the maintenance schedule, for example twice a year. The component is not replaced, it is maintained.
The three steps of restoration
Step What you do Why Buffer layer Apply an intermediate layer Dilutes the carbon and alloy content of the base material Build-up Restore heavily worn parts to size Restores the original dimensions with crack-resistant material Hardfacing Apply the wear-resistant top layer Protects the surface against further wear Not every repair requires all three steps. With light wear, you can hardface directly. With crack-sensitive base material, a buffer layer is recommended. Hilchrome 312R is a commonly used choice for this.
Where you will come across hardfacing
- Earthmoving machinery, buckets and teeth in mining
- Ploughs, harvesting machines and planting machines in agriculture
- Rollers, filters and piping in the sugar industry
- Conveying and processing installations in the cement industry
- Pumps, mixers and valves in the process industry
In agriculture and earthmoving, a specific form of wear is added. Components that move through soil, sand and stones are subject to abrasive wear. On stony or volcanic ground this happens faster than in soft clay, but it occurs everywhere.
The benefit for your operations
The key issue is downtime. If a component breaks and you have to wait until a new one has been shipped, flown in or even manufactured from scratch, production is at a standstill in the meantime. If the component can be removed, repaired and refitted, the downtime is a fraction of that time.
In addition, you extend the service life of existing components. In this way, a machine gets a second and sometimes a multiple life. From a sustainability perspective, that is interesting: the component is reused after restoration, instead of being scrapped and replaced.
Read more about this in our article repair instead of replacing for less downtime and a longer service life and on our repair and maintenance page.
We are happy to help you choose the right hardfacing product for your wear situation.














