How do I repair bronze components, ship propellers and bearings?

For welding and surfacing copper, copper alloys and bronze, use HILCO Bronsil, a basic covered tin bronze electrode to AWS A5.6 E CuSn-C. Typical applications are the repair of ship propellers, rotors and bearings.

Why bronze in the maritime sector

Bronze is widely used in places where components are permanently in contact with water. Ship propellers, bearing bushes and fittings are examples of this. The material withstands the conditions that prevail there, but it does get damaged in collisions, through contact with floating debris and through wear in service.

Replacing such components is costly and requires lead time. In many cases, repair is the faster and more economical route, especially when a ship is in port and has to sail again within a limited time window.

What Bronsil can do

PropertyExplanation
AWS A5.6 E CuSn-C mod.Basic covered tin bronze electrode
Joining and surfacingSuitable for copper, copper alloys and bronze alloys
Surfacing on steelCan be used for cladding steel
Smaller repairsAlso usable on cast iron and C/Mn steel
Diameters2.5 to 4.0 millimetres

In addition to maritime applications, the product is used in heavy mechanical engineering. Read more about that sector on our heavy fabrication and shipbuilding pages.

Repairs on board

On a ship, there is more to do than repairing plate work. In the engine room there are pumps and engine parts that fail. On deck there are winches, hooks and eyes that can break off during mooring. These situations require a compact repair kit that can handle a variety of materials.

Why fast action pays off here

Ships are held up on their voyage by damage and breakdowns. Collisions, manoeuvring damage and mechanical problems in the engine room occur on all types of ships, from tankers and bulk carriers to smaller vessels. When a ship is laid up for repair, every day counts. That requires the right products to be available at the moment they are needed, and someone on board or in the workshop who knows which product belongs with which material.

With these five products, you cover a large proportion of the repairs that occur on board or in a workshop. The data sheets can be found under non-ferrous documentation.

We are happy to help you put together a repair kit for your situation.

Contact

Do you have a question? Feel free to contact us using this contact form!

  1. How do I repair bronze components, ship propellers and bearings?
    "

    For welding and surfacing copper, copper alloys and bronze, use HILCO Bronsil, a basic covered tin bronze electrode to AWS A5.6 E CuSn-C. Typical applications are the repair of ship propellers, rotors and bearings.

    Why bronze in the maritime sector

    Bronze is widely used in places where components are permanently in contact with water. Ship propellers, bearing bushes and fittings are examples of this. The material withstands the conditions that prevail there, but it does get damaged in collisions, through contact with floating debris and through wear in service.

    Replacing such components is costly and requires lead time. In many cases, repair is the faster and more economical route, especially when a ship is in port and has to sail again within a limited time window.

    What Bronsil can do

    PropertyExplanation
    AWS A5.6 E CuSn-C mod.Basic covered tin bronze electrode
    Joining and surfacingSuitable for copper, copper alloys and bronze alloys
    Surfacing on steelCan be used for cladding steel
    Smaller repairsAlso usable on cast iron and C/Mn steel
    Diameters2.5 to 4.0 millimetres

    In addition to maritime applications, the product is used in heavy mechanical engineering. Read more about that sector on our heavy fabrication and shipbuilding pages.

    Repairs on board

    On a ship, there is more to do than repairing plate work. In the engine room there are pumps and engine parts that fail. On deck there are winches, hooks and eyes that can break off during mooring. These situations require a compact repair kit that can handle a variety of materials.

    Why fast action pays off here

    Ships are held up on their voyage by damage and breakdowns. Collisions, manoeuvring damage and mechanical problems in the engine room occur on all types of ships, from tankers and bulk carriers to smaller vessels. When a ship is laid up for repair, every day counts. That requires the right products to be available at the moment they are needed, and someone on board or in the workshop who knows which product belongs with which material.

    With these five products, you cover a large proportion of the repairs that occur on board or in a workshop. The data sheets can be found under non-ferrous documentation.

    We are happy to help you put together a repair kit for your situation.

    "
  2. What is the difference between HILCO Bronze C and Bronze F?
    "

    Both are brass-based brazing rods with low fume emission. Bronze C is a bare rod used with a separate flux, while Bronze F has a flux coating and does not need a separate flux.

    The practical difference

    FeatureBronze CBronze F
    AWSA5.8 approx. RB CuZnCA5.8 RB CuZn-C
    FluxApplied separatelyApplied to the rod
    Length1000 millimetres500 millimetres
    Diameters1.5 to 6.0 millimetres2.0 to 3.0 millimetres
    PackagingBoxes of 5.0 kilosBoxes of 2.5 kilos

    Bronze F is more convenient to use because you do not need to carry or apply a separate flux. That saves handling, especially when working on site. Bronze C gives you more freedom in the choice of flux and is available in a larger diameter range. For Bronze C, HILCO supplies a matching Bronze Flux.

    What you use them for

    Both products are suitable for joining and surfacing steel, copper and copper alloys, brass, grey and malleable cast iron, nickel and nickel alloys. They produce pore-free joints in a colour that closely matches brass, which is an advantage for visible work.

    An important feature is that you can join galvanised steel with them without damaging the zinc coating. During welding, the zinc coating evaporates around the joint, after which the corrosion protection at that point is gone. Brazing takes place at a lower temperature, so the zinc coating largely remains intact.

    Why low fume emission matters

    Brass contains zinc, and zinc evaporates when heated. The designation low fuming means that the composition has been chosen so that less fume is released. That makes the work more pleasant and reduces the exposure of the welder. Good fume extraction and personal protection nevertheless remain essential. For this, see the safety data sheet of the product and our range of personal protective equipment.

    When to choose silver brazing

    If the joint has to be made at an even lower temperature, or if you work with thin components and fine work, the silver brazing rods are an alternative. These are widely used in refrigeration and installation work.

    Difference from welding

    In brazing, the base material does not melt. The filler metal flows over the heated surface and bonds to it. As a result, the heat input remains lower than in welding, which limits distortion and leaves the properties of the base material largely intact. That is an advantage for thin components and for materials that do not tolerate high temperatures well.

    On the other hand, a brazed joint has different strength properties from a welded joint. For load-bearing structures with high requirements, welding is the preferred route. For joining dissimilar materials, for pipework and for repair work on thin parts, brazing is often the better choice.

    We are happy to advise you on the choice between welding, brazing and soldering for your application.

    "
Certificates
  • TUV.png
  • LR.png
  • ISO.png
  • DNV.png
  • CE.png
  • Bureau Veritas.png
  • AEO.png
  • ABS.png
Read more >
Receive our newsletter!

Sign up for the free newsletter to stay up to date

Quotation Shopping cart

Your shopping cart is still empty!

Add products from the catalog to place an order
Continue shopping
  • :
  • :
  • Total weight
Op voorraad
Not in stock
excl. VAT
Aanbevolen producten