A safe cutting disc complies with EN 12413 and preferably carries the oSa quality mark. The disc states the maximum permitted rotational speed, the dimensions, the application and the expiry date.
The applicable standards
Designation What it means EN 12413 European safety standard for bonded abrasives oSa Quality mark of the Organisation for the Safety of Abrasives ISO 9001 Quality management system of the manufacturer Maximum speed The highest permitted rotational speed of the disc Expiry date Bonded discs have a limited service life HILCO Hildiscs are produced in accordance with ISO 9001 and EN 12413 and meet the requirements of the Organisation for the Safety of Abrasives. This means that the discs are tested by an independent party and that requirements apply to the production, not only to the end product.
Why this is not a formality
A cutting disc runs at high speeds. If a disc breaks during use, the fragments are released at great speed. That is a real safety risk for the user and for everyone in the immediate vicinity. The standards and the glass fibre reinforcement in the disc are there to prevent this.
What you will find on the disc itself
All mandatory information is on the label of the disc. In addition to the standard and the quality mark, you will find the dimensions, the maximum speed, the material for which the disc is intended and the expiry date. Take the trouble to read that information before you mount the disc. It is the quickest check you can carry out and it takes a few seconds.
Practical safety rules
- Check the maximum speed on the disc against the speed of your machine
- Always use the guard of the machine
- Do not use a cutting disc for grinding, the side is not designed for this
- Check the disc for cracks and damage before use
- Store discs dry and flat, moisture and distortion affect the disc
- Observe the expiry date
What the quality mark says about the manufacturer
A quality mark such as oSa tests not only the end product but also the way in which it is made. The manufacturer must demonstrate that its process is under control and is inspected on that basis periodically. That distinguishes certified discs from products chosen on price alone. For a product that runs at high speeds and is used close to the user's face, that is a relevant difference.
Protecting the user
Grinding and cutting release sparks, dust and particles. Eye protection, hearing protection and respiratory protection are therefore essential. Our range of personal protective equipment is designed for this.
For us, safety is not an afterthought. That applies to the products we supply and to the way in which we advise on them.
Do you have questions about the right disc for your machine? Contact us.














