Choose an automatic welding helmet with a welding filter if you weld regularly and in varying conditions. Choose a flip-up welding helmet if you weld occasionally or if you want to be able to grind and inspect frequently between welds without taking off the helmet.
The difference
Feature SparkShield ADF SparkShield flip-up Operation Filter darkens automatically when the arc is struck Visor flipped up and down manually Sensors Four arc sensors Not applicable Shade range 9 to 13, adjustable Fixed glass, shade 10 Field of view Large field of view More limited Suitable for Regular welding, varying amperages Occasional welding, alternating welding and grinding Why an automatic filter is pleasant to work with
With a fixed glass, you have to lower the helmet each time before you strike the arc. That takes time and positioning the electrode is then done by feel. An automatic filter stays clear until the moment the arc is struck, after which it darkens within a fraction of a second. You therefore see your workpiece until just before the arc is struck.
The adjustable shade range of 9 to 13 makes it possible to adapt the darkness to the process and the amperage. When TIG welding at low current, you work with a lighter setting than when welding with thick electrodes at high current.
Maintenance and replacement parts
The protective lenses in front of and behind the filter are consumables. They catch spatter and become dull over time. Replace them in good time, because a dull lens reduces visibility and therefore the quality of your work. Separate protective lenses for both helmet types can be found among the accessories.
- Check before use that the filter darkens correctly
- Replace scratched or fogged protective lenses
- Store the helmet in a dry environment, out of direct sunlight
- Clean the helmet with a soft cloth, do not use solvents
Protection is more than the helmet
A welding helmet protects the eyes and face against radiation, heat and spatter. The neck, arms, torso and hands require their own protection. So combine the helmet with gloves, a welding jacket or welding apron and, where necessary, welding sleeves and a neck tube.
When a flip-up is practical
A flip-up helmet has a hinged visor with a fixed welding glass. If you flip the visor up, you look through a clear protective lens and can grind, measure and inspect without taking off the helmet. For work in which you constantly alternate between welding and finishing, that is convenient. It is also a practical choice as a second helmet for occasional use or for visitors.
We are happy to advise you on the right combination of protection for your welding process.














