For welding clothing, EN ISO 11611 applies, with class 2 being the higher level of protection. For gloves and mechanical protection, EN 388 applies. Welding helmets with an automatic welding filter are designated with a shade range for the darkness of the filter.
The standards in brief
Standard For What you need to know EN ISO 11611 Protective clothing for welding and allied processes Class 2 offers higher protection against riskier welding techniques and spatter EN 388 Mechanical protection of gloves The figures indicate the resistance to abrasion, cutting, tearing and puncture Welding filter shade number Darkness of the welding filter The higher the number, the darker the filter Which class and which shade number you need depends on the welding process, the amperage and the conditions. At higher amperages, a darker filter is required. For processes with a lot of spatter, a higher clothing class is recommended.
What the range consists of
Product Material or design Protects SparkShield ADF welding helmet Four arc sensors, shade 9 to 13 Eyes and face SparkShield flip-up welding helmet Flip-up visor Eyes and face Welding gloves Split cowhide leather, flannel lined Hands and wrists Welding jacket Flame retardant Torso and arms Welding apron Split cowhide leather Chest, torso and legs Welding sleeves Split cowhide leather with hook and loop fastening Forearms Welding cap Flame retardant cotton, reversible Head and neck Neck tube Flame retardant cotton Face and neck Why comfort counts
Protective equipment only works when it is actually worn. Clothing that pinches or gloves that take away the sense of touch are taken off or avoided in practice. That is why, when putting together the range, we look at both the level of protection and the fit and wearing comfort throughout a full working day.
The same applies to the welding helmet. A large viewing window and a fast-reacting filter make the work less tiring, allowing the welder to stay concentrated for longer.
Protection during and after welding
Welding remains a process in which the welder must protect himself properly. Radiation is released, heat is generated and fumes and spatter are produced. The extent to which this occurs depends on the process, the base material and the filler metal. So always consult the safety data sheet of the product you are using, as it states which substances are released and which measures apply.
Also think about the phase after welding. A freshly welded workpiece stays hot for a long time and slag can fly in all directions when chipped off. So keep your protection on until the work is actually finished and has cooled down.
What protection does not replace
Personal protection is the last step in the safety chain, not the first. Good fume extraction, a tidy workplace and the correct settings of the welding machine remain essential. For the specific risks of a product, always consult the associated safety data sheet under documentation.
We are happy to help you put together a complete protection package for your team.














