Two products can state the same hardness and yet differ greatly in service life. Hardness says something about the resistance to indentation, not about the resistance to wear. What matters is the way in which that hardness is achieved.
Two routes to the same hardness
You can achieve hardness by adding a lot of carbon. Carbon is inexpensive and produces a high value on the measuring scale. You can also achieve the same hardness by adding molybdenum and chromium. These are more expensive alloying elements, but they create a fine-grained structure that is considerably more resistant to wear at the same hardness.
On paper, the same number appears in both cases. In practice, one product lasts longer than the other. Anyone who only looks at the stated hardness is therefore not comparing what they think they are comparing.
How to compare instead
What to look at Why it matters The chemical composition Shows which alloying elements build up the hardness The structure of the weld metal A martensitic structure performs differently from a high carbon content The classification according to EN 14700 or DIN 8555 Indicates the field of application, not just the hardness The type of wear it is intended for Abrasion, impact and friction each require different properties The number of maintenance interventions per year The practical measure of what a product delivers The chemical composition of our products is stated on the data sheet. For critical applications, we also supply a quality certificate with the measured values per batch. This allows you to compare on the data that really matter.
The calculation that counts
Suppose you have to hardface a component twice a year with product A and once a year with product B. Then product B may cost more per kilo and you will still be better off at the end of the year. Moreover, one fewer maintenance intervention also means one fewer shutdown of the installation.
So do not only look at the price per kilo, but at what the product delivers in your situation over a maintenance cycle. This applies in particular to repair and maintenance, where the frequency of intervention determines the real costs.
What we do and do not claim
We do not make general statements about the service life of our products compared with those of others. What we do is demonstrate what our products consist of and which values we have measured. On that basis, you can make a substantiated comparison yourself. For the associated documentation, please refer to material test certificates.
Would you like to see the composition of a specific hardfacing product? Contact us and we will send you the data sheet.














