The letter indicates the welding process for which the product is intended. A name ending in R stands for a covered electrode, a name beginning with W stands for a TIG rod and a name beginning with G stands for a MIG wire.
The system in brief
Designation Welding process Example Ends in R Covered electrode, also known as stick welding, MMA or SMAW Hilchrome 316R Begins with W TIG rod, also known as GTAW Hilchrome W316L Begins with G MIG wire, also known as GMAW Hilchrome G316LSi The number in the name refers to the alloy class and corresponds to the AISI designation of the base material. Hilchrome 316R, W316L and G316LSi are therefore three versions of the same alloy, intended for three different welding processes.
Why this is practical
Once you know which steel grade you are welding, you only need to determine which process you are working with. The rest of the product name stays the same. That makes it easier to switch process within a project without losing sight of the alloy.
In practice, this happens often. Pipes are usually TIG welded because they are thin-walled and the first pass must be clean and sealed. After that, they are often completed with MIG because it is faster. You then use W316L for the root pass and G316LSi for the fill passes, within the same alloy class.
Where else you will come across the letters
- Products with HARDMELT in the name are hardfacing electrodes
- Products with FER in the name are solid wires for unalloyed and low-alloy steel
- Products with HILCORD in the name are cored wires
- Products beginning with a B are basic covered electrodes for low-alloy steel
- Products with CHROMO or CrMo in the name are creep resistant and intended for elevated temperatures
The addition L in a name such as W316L or G308LSi stands for a low carbon content. The addition Si indicates an increased silicon content, which improves the flow characteristics of the weld pool.
Why the designations are used interchangeably
In data sheets, standards and conversations, you will come across several terms for the same process. Covered electrodes are referred to as stick welding, MMA, SMAW or simply electrode welding. MIG and MAG together fall under GMAW, TIG under GTAW. These terms all refer to the same process, but come from different systems of standards and language areas. Our product pages always state the process for which the product is intended, so you do not need to translate between those systems.
The full classification according to AWS and EN can be found on every product page and on the associated data sheet. The brand name and classification are printed on the coating of the electrode itself.
We are happy to help you translate a classification into the right product.














