Choose the filler metal that matches the stainless steel grade you are welding. For AISI 304 and 304L use the 308 grade, for AISI 316 and 316L the 316 grade, and for the stabilised types 321 and 347 the 347 grade.
Why matching welding is particularly important here
Stainless steel owes its corrosion resistance to chromium. Nickel is added to keep the material readily weldable. If the material must withstand more acidic media or higher temperatures, molybdenum is added. This composition determines what a steel grade can withstand.
If, for example, you weld a pipe that carries milk, fruit juice or a chemical medium, the welded joint must have the same resistance as the rest of the pipe. A weld with a lower alloy content becomes the weak point in the installation. In an environment where sulphuric acid is pumped, higher demands are placed on the material than in a dairy plant. So first identify the base material and then find the matching product.
The HILCHROME range by steel grade
Base material Covered electrode MIG wire TIG rod AISI 304, 304L, 308L Hilchrome 308R G308LSi W308L AISI 316, 316L Hilchrome 316R G316LSi W316L AISI 321, 347, 348 Hilchrome 347R On request On request AISI 309, heat-resistant CrNi Hilchrome 309R G309LSi W309L AISI 310, 310S Hilchrome 310R On request On request Dissimilar and difficult to weld Hilchrome 312R G307 On request Special cases
- For joining dissimilar steels and for buffer layers, choose Hilchrome 307R or Hilchrome 312R
- For armoured and clad plates, Hilchrome 309MoR is suitable thanks to its increased ferrite content
- For ferritic chromium steels such as 410, 430 and 431, use 308, 309 or 310 grades
The welding process determines the form
Within an alloy class, you choose the version that suits your welding process. Pipes are often TIG welded because of their small wall thickness, after which they are completed with MIG or covered electrodes. If you work outdoors or in a place that is difficult to reach, a gas-shielded process is ruled out and you use a covered electrode. For that reason, many stainless steel joints in the process industry are still made with HILCHROME electrodes.
With stainless steel, also pay attention to your tools. Use separate brushes and discs, so that no iron particles remain on the surface. Those particles can later cause rust on an installation that is itself stainless.
Packaging and storage
HILCHROME electrodes are supplied in hermetically sealed metal tins. This packaging keeps the electrodes dry in the same condition as immediately after production and protects against climate changes and moisture absorption. When used within an eight-hour working day, this produces weld metal free of porosity, regardless of the climate.
The data sheets and safety data sheets can be found under stainless steel documentation.
You know the steel grade but are unsure about the combination with your process? Contact us for advice.














