For simple steelwork without special requirements, choose a rutile covered electrode such as HILCO Red Extra. If there are requirements for strength, toughness or impact toughness at low temperature, choose a basic covered, low-hydrogen electrode such as HILCO Basic or HILCO Basic Super.
Rutile or basic
The difference lies in the coating. Rutile covered electrodes are easy to use, strike easily, weld smoothly and leave a slag that is easy to remove. They are suitable for structural work where one electrode type is sufficient. Basic covered electrodes produce low-hydrogen weld metal, which limits the risk of hydrogen cracking. They deliver better mechanical properties, also at low temperature, and are therefore the choice for thicker plates and heavier structures.
The range at a glance
Product AWS Character Typical application Red Extra A5.1 E 6013 Rutile, all positions incl. vertical down General steelwork, repair and maintenance Basic A5.1 E 7018-1 Low hydrogen, down to -50 degrees Celsius Structural work with toughness requirements Basic Super A5.1 E 7018-1 Low hydrogen, down to -40 degrees Celsius, AC and DC Structural work on varying power sources Basic 55 A5.1 E 7016 Double coated basic-rutile, down to -30 degrees Celsius Root passes and full penetration Velveta A5.1 E 6013 Smooth, vertical up, AC and DC Small diameter pipes, X-ray quality Velora A5.1 E 6013 Spatter-free, flat position Thin sheet Brown A5.1 E 6013 Fast freezing, vertical down Rusty, painted or contaminated steel E6011 A5.1 E 6011 Deep penetration, forceful arc Contaminated, rusty or galvanised material Regina 150 and 160 A5.1 E 7024-1 High efficiency, 160 percent recovery Fillet welds in the flat position What to consider when choosing
- The welding position. Not every electrode is suitable for vertical down welding
- The condition of the material. On rusty or painted steel, Brown and E6011 perform better
- The type of current of your welding machine. Some types only work on direct current
- The impact toughness requirement. If your specification calls for values at low temperature, choose low hydrogen
- The plate thickness. Thicker plates require more toughness in the weld metal
Why ease of use counts
An electrode that strikes easily, produces little spatter and leaves a self-releasing slag saves the welder finishing work. That is not a minor detail. A welder who enjoys working with the material works with more concentration and lays down more metres per day. So it is not only about the mechanical properties on paper, but also about how the product behaves in the welder's hand.
All data sheets and safety data sheets for these products can be found under unalloyed steel documentation.
We are happy to help you choose the right product for your application.














